EPC Boiler

EPC Boiler EPCB is a professional boiler manufacturer in industrial steam boiler, hot water boiler, gas boiler, coal boiler, biomass boiler, oil boiler and so on.

04/08/2026

Boiler Quality Starts Before Production

EPCB exports thousands of boilers worldwide every year, supported by strong manufacturing capacity and strict quality control.

With professional laboratory equipment, qualified testing personnel, and standardized heat-treatment processes, EPCB carefully controls every step to improve material performance and ensure the safety, stability, and reliability of each boiler system.

A reliable boiler begins with qualified raw materials—and EPCB never compromises on quality.

Boiler feed pump problems are not always caused by the pump itself.Vibration, low flow, overheating, seal leakage, or mo...
31/07/2026

Boiler feed pump problems are not always caused by the pump itself.

Vibration, low flow, overheating, seal leakage, or motor trips may result from insufficient suction pressure, clogged strainers, poor alignment, lubrication failure, or control faults.

Accurate troubleshooting starts with identifying the root cause—not simply replacing parts.

Click to learn more about common issues with boiler feed pumps and solutions:https://www.epcbboiler.com/common-boiler-feed-pump-problems.html

28/07/2026

Another EPCB boiler project has been successfully installed!

The 10 t/h gas-fired steam boiler system supplied by EPCB to a food processing plant has now completed on-site installation.

Comprising everything from the boiler unit, burner, and intelligent control system to the condensate recovery unit and deaerator, this complete system configuration ensures a stable, efficient, and reliable steam supply for the client.

On-site technical discussions and commemorative photos not only mark the successful completion of the installation but also stand as a testament to the client's trust in EPCB and the beginning of continued cooperation between the two parties.

A boiler feed pump is more than a water delivery device—it is essential for maintaining stable drum level and continuous...
24/07/2026

A boiler feed pump is more than a water delivery device—it is essential for maintaining stable drum level and continuous steam production.

Correct pump selection must consider boiler capacity, operating pressure, feedwater temperature, required head, NPSH, and control method. A properly matched feed pump helps prevent cavitation, low-water conditions, unstable operation, and unexpected shutdowns.

EPCB provides professionally matched boiler feedwater solutions based on actual operating conditions, ensuring reliable and efficient steam system performance.

Click to learn more:https://www.epcbboiler.com/what-is-a-boiler-feed-pump.html

21/07/2026

Every boiler project begins with understanding the customer's real production needs.

For this chemical enterprise in Bangladesh, EPCB carefully evaluated the required steam capacity, operating stability, fuel conditions, water quality, environmental requirements, and daily operation needs before developing a customized 15 T/h coal-fired steam boiler system.

From the boiler body and fuel conveying system to heat recovery, dust collection, water treatment, intelligent control, and safety protection, every component was selected to support stable and efficient chemical production.

EPCB does more than manufacture boilers—we provide steam solutions designed around the customer's needs.

🔥 Hot Boiler Water Should Never Go Straight to the DrainBoiler blowdown water can remain extremely hot and may rapidly t...
17/07/2026

🔥 Hot Boiler Water Should Never Go Straight to the Drain

Boiler blowdown water can remain extremely hot and may rapidly turn into flash steam when pressure drops. Direct discharge can damage drainage systems, create safety hazards, and violate local discharge requirements.

A properly designed blowdown tank safely reduces pressure, vents flash steam, cools the remaining water, and collects sediment before drainage.

Safe blowdown is not only a maintenance issue—it is an essential part of a reliable steam boiler system.

Click to learn more:https://www.epcbboiler.com/what-is-a-tank-blowdown.html

Fixed-schedule blowdown may be damaging your boiler.Many plants still operate using fixed blowdown schedules—such as "on...
10/07/2026

Fixed-schedule blowdown may be damaging your boiler.

Many plants still operate using fixed blowdown schedules—such as "once per shift" or "for a few minutes at a time"—while overlooking fluctuations in boiler water conductivity and feedwater quality.

Insufficient blowdown can lead to:

Boiler scaling
Reduced steam quality
Elevated tube wall temperatures
Shortened equipment lifespan

Excessive blowdown, on the other hand, increases the consumption of fuel, water, and chemicals.

A more reliable approach is to adjust blowdown frequency and volume based on actual water quality and operating loads, rather than relying solely on a time-based schedule.
Click to learn more: https://www.epcbboiler.com/boiler-blowdown.html

07/07/2026

For food production, steam stability is essential.

That is why EPCB provides a complete gas-fired steam boiler system, including the boiler body, burner, control system, economizer, water treatment, steam distributor, valves, instruments, and chimney.

Each part is designed to support efficient operation, stable steam supply, and long-term reliability for the customer’s production line.

EPCB Boiler—supporting industries with professional steam solutions.

Many factories focus on boiler purchase price.But after installation, the real cost comes every day — fuel consumption, ...
03/07/2026

Many factories focus on boiler purchase price.

But after installation, the real cost comes every day — fuel consumption, maintenance, labor, emission treatment, and operating efficiency.

Choosing the wrong fuel may look economical at the beginning, but it can become expensive over years of continuous production.

EPCB helps customers compare fuel options based on real working conditions, not just surface prices.

Click to learn more about comparing fuel costs for industrial boilers：https://www.epcbboiler.com/operating-costs-comparison-different-fuel-boilers.html

30/06/2026

A complete steam system has been shipped to Bangladesh..

At the EPCB production base, two 15 t/h coal-fired steam boilers have completed final inspection and are ready for delivery. From boiler manufacturing to auxiliary system configuration, every detail reflects EPCB's commitment to quality, reliability, and long-term customer value.

Behind every successful shipment is EPCB's professional engineering, strict quality control, and one-stop service support.

Reliable boilers. Complete solutions. Global service.

Address

No. 39 Shiling Road, Laoshan District, Qingdao
Shandong
266000

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+86-532-66717007

Website

Alerts

Be the first to know and let us send you an email when EPC Boiler posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Organization

Send a message to EPC Boiler:

Shortcuts

Share