EnerStaff, LLC

EnerStaff, LLC EnerStaff offers a wide range of mechanical and technical services that focus on the quality, maintenance, and ongoing integrity of process equipment.

EnerStaff, LLC offers a wide range of mechanical and technical
services that focus on the quality, maintenance, and ongoing
integrity of critical process equipment. We can assist with
recruiting and the hiring process of permanent and temporary
maintenance personnel aimed at enhancing the productivity
of our clients. Our multi-craft technicians have extensive experience
and knowledge in the petroc

EnerStaff, LLC offers a wide range of mechanical and technical
services that focus on the quality, maintenance, and ongoing
integrity of critical process equipment. We can assist with
recruiting and the hiring process of permanent and temporary
maintenance personnel aimed at enhancing the productivity
of our clients. Our multi-craft technicians have extensive experience
and knowledge in the petroc

Operating as usual

12/22/2021

We are currently looking for a HSE Supervisor
(Must Have Supervision Experience) please send resumes to [email protected]
Requirements: OSHA 510 and 500
Location: Cameron, La
Duration: 2 weeks to 2months
Start date: 12/27
Pay: $35 an hour and 100 a day per diem

12/21/2021

We are currently looking for a FW/HW to go to Maryland 1/3.
Pay: $18.00
Duration: About a Month
Per diem: $120.00
Will get travel time, will need to have a TWIC and clear background (DISA Score of 0)
Please send email to [email protected] put Maryland in the subject with your number. There is only one spot.

12/20/2021

Currently looking for a few Singlehand welders for a shop in Channelview field service work after. Must be able to TIG root fill and cap. STICK 6010.
Shop pay: 32.00
Field pay $32.00, $120.00 (for those who qualify)
Please send resumes to [email protected]
Put single hand in the subject

12/20/2021

Currently looking for a Mainteance Tech for San Antonio Shop

Pay Rate is $28.00 ( no per diem)

Experience with running conduit, pulling wire, terminations, and mechanical equipment.

AC/DC conversions, Gearboxes, Terminate 3 phase

Mechanical, Instrumentation, Pneumatic and able to trouble shoot equipment.

Please send resumes to [email protected]

12/17/2021

I need a couple of single-hand welders local to the Deerpark, Tx. Will have to weld test Monday at WTI. Welding on a super heater in a shop then moving to the field after a few weeks. Pay is $32.00, send me an email [email protected] with a resume put singlehand in the subject.

12/10/2021

We are currently looking for a few Expeditors
Location: Remote
Pay:$30-$40

This is a remote opportunity, contractor can be based anywhere
Candidates must have strong ERP knowledge—they will be inputting data into ERP system, IFS Working knowledge with IFS is strongly preferred, and would be ideal We’re anticipating that this will be a 6 month project, but the duration may vary
Please send emails to [email protected] put Expeditor in the subject

12/07/2021

We are currently hiring the following positions for Dallas, Tx
Receptionist/Admin payrate $18-$20 must have procurement/ P.O order creation
HR Temp $15-$20 must have recruiting experience in Oil and Gas
Please send resumes to [email protected] put Dallas in the subject

12/07/2021

Currently hiring for the following positions:
Horizontal boring mills ($32 and up)
Multi-Stage Horizontal centrifugal pump mechanics ($28 and up)
Location: Houston, Tx 77075 Shop Job with plenty of overtime.
Please send resumes to [email protected]
Put Shop Houston in the subject.

12/01/2021

Direct Hire Opportunity
Dump Truck – CDL Class B Drivers
Pay up to $28/hr
TWIC card preferred
Average 50 hours per week.

*Must have a clean MVR record
*Minimum 2 years of experience required for insurance
*Must be able to pass pre-employment drug and alcohol testing

Please send resumes to [email protected]

12/01/2021

We are currently hiring for the following crafts at a shop in Houston
Pump Mechanics: $30 and up (DOE) Must have experience on horizontal and vertical centrifugal pumps
Boring Mill Operator: $35 and up (DOE)
Location: Houston, TX 77075 (no per diem shop job)
Temp to Perm
Shift: 6:30am- 2:00pm; 3:30pm – 12:00am (there is a lot of overtime right now must be able to work weekends and longer shifts as required)
Please send resumes to [email protected]

11/30/2021

Position HR Coordinator
Pay: $45k-$60k
Direct Hire
Location: Dallas, Tx
Send Resumes to [email protected] put HR Coordinator in the subject.
The HR Coordinator will directly assist the Talent Acquisition Manager on all recruitment activity such as sourcing, screening, requisition management, etc. This person will also support other Corporate HR team members on a wide range of projects related to HR compliance and audits, employer branding, community outreach, social media efforts, onboarding, and general data entry.
Education: High school diploma or equivalent required; pursuing a degree in HR Management or similar field preferred
Experience:
Recruitment experience or HR administrative experience is strongly preferred
Basic office experience including Microsoft Outlook, PowerPoint and Word preferred; strong Excel skills preferred
Strong working knowledge with various Social Media vehicles (LinkedIn, Instagram, Twitter, Facebook, Snapchat, etc.)
General understanding of full-cycle recruiting is strongly preferred
Responsibilities:
Work within the HRIS database, Ultimate Kronos Group (UKG) to enter in new data, clean-up current applicant data, and help maintain candidate and employee information.
Work closely with hiring managers during the screening and selection process.
Collaborates with corporate HR team with creating and launching social media campaigns; design and implement social media strategy.
Schedule and confirm phone interviews and/or onsite interviews with applicants; coordinates and requests travel accommodations for candidates when needed.
Conducts audits to ensure compliance and recommends corrective action.
Assists with completing Affirmative Action process and data collection.
Runs reports within the reporting system on an as-needed basis as well as builds and schedules reports for other HR team members.
Assists in preparing company announcements or correspondence.
Collaborates with other HR team members in preparing and executing projects.

11/29/2021

Position: HR Temp/Recruiter
Pay Rate: $15-$20 (no per diem)
Location: Dallas, Tx
Temp Position
Send resumes to [email protected] put HR Temp in Subject


As the Human Resources Temp, you will support the HR team with a wide range of projects. You will use your organization and communication skills to assist in an array of HR responsibilities such as recruiting, pre-hire processes, onboarding, compliance, wellness initiatives, and event planning. You will also assist the team in an administrative capacity as needed. Your responsibilities will require confidentiality and the ability to multi-task.

Essential Functions ...
• Ability to handle responsibilities with effective interpersonal skills and to effectively interface with others inside and outside the Company is required.
• Processes forms related to additions, changes, or deletions for salary administration and benefit programs.
• Accurately maintains computerized and manual records to allow for prompt retrieval.
• Maintains logs and prepares reports relating to worker's compensation, Equal Employment Opportunity and Affirmative Action.
• Organize I-9 documents
• Manage and maintain annual shredding
• Uses scanning equipment and data storage procedures to stare and facilitate easy retrieval of documents.
• Performs a variety of clerical and administrative duties.

11/29/2021

We are currently looking for the following crafts for a shop location in Channelview, Tx. Please send resumes to [email protected] No DMs please. Put Electrician Channelview in the subject.
Master Electrician: $38-$40 must have knowledge of VFDs, AC/DC conversion
Journeyman Electrician: $28-$32 (DOE)
Shift: 6am-6pm, 6pm-6am rotating shifts
Temp to Perm, Need immediately start
NO PERDIEM

In observance of the Thanksgiving holiday our offices will be closed on Thursday, November 25th and Friday, November 26t...
11/23/2021

In observance of the Thanksgiving holiday our offices will be closed on Thursday, November 25th and Friday, November 26th. For our current employees, please note that our payroll is still guaranteed for deposit on Friday. Have a safe and Happy Thanksgiving!

In observance of the Thanksgiving holiday our offices will be closed on Thursday, November 25th and Friday, November 26th. For our current employees, please note that our payroll is still guaranteed for deposit on Friday. Have a safe and Happy Thanksgiving!

11/17/2021

We are currently hiring some shop helpers for a Dallas Shop. Must be able to lift heavy tubes, grind tubes, and help keep the shop clean. Pay is $18.00, if interested please text 281-282-1300

11/16/2021

Currently looking for someone local to Kansas City for a Firewatch/General Labor job. Pay is $24.00, please text 281-282-1300 if you are local to Kansas City.

11/11/2021

We are currently looking for Mechanics for a Pasadena Shop. Auto Mechanics, Heavy Equipment, Industrial Mechanics, and Diesel Mechanics. Must have own tools, toolbox, and valid Driver License.
Please send resumes to [email protected] and put Mechanic in the subject.
Shift: 7:30 am- 4:30 pm (over time and weekends required)
Pay Rate: $26-$28
Contract work with the opportunity to go temp to perm
Start Date: ASAP

11/10/2021

We are currently hiring Turbine Mechanics for a Pasadena, Texas shop location. You will be required to take apart, inspect and rebuild rotating equipment. We are willing to train auto mechanics with rotating equipment. This is a contract job until January with the ability to go permanent. Resumes required please send to [email protected]
Shift: Monday-Saturday 7:30 am – 4:30pm OT required must be flexible to work nights
Pay: $17-$30
Requirements: Must pass drug screen and background, have a valid driver license and own tools

11/10/2021

We are currently looking for the following crafts for a shop location in Channelview, Tx. Please send resumes to [email protected] No DMs please. Put Electrician Channelview in the subject.
Master Electrician: $38-$40 must have knowledge of VFDs, AC/DC conversion
Journeyman Electrician: $28-$32 (DOE)
Shift: 6am-6pm, 6pm-6am rotating shifts
Temp to Perm, Need immediately start
NO PERDIEM

11/08/2021

We are currently hiring Mechanics for a Pasadena, Texas shop location. You will be required to take apart, inspect and rebuild rotating equipment. We are willing to train auto mechanics with rotating equipment. This is a contract job until January with the ability to go permanent. Resumes required please send to [email protected]
Shift: Monday-Saturday 7:30 am – 4:30pm OT required must be flexible to work nights
Pay: $17-$28
Requirements: Must pass drug screen and background, have a valid driver license and own tools

Daylight saving time 2021 - Reminder to turn your clocks back this weekend!
11/05/2021

Daylight saving time 2021 - Reminder to turn your clocks back this weekend!

Daylight saving time 2021 - Reminder to turn your clocks back this weekend!

11/03/2021

We are currently hiring for an Admin to assist the Project Manager at West Lake Chemical, Lake Charles. Will need to have experience on the computer, able to handle time sheets, help with inventory, and run parts. Will need TWIC and Valid Driver License.
please send resumes to:[email protected]
Put Admin West Lake in the subject
Pay:$20.00 an hour (no per diem)
Duration: 6 months (possibly longer)

10/29/2021

We are currently looking for Bolt Hands for Westlake. Must have TWIC
Pay Rate: 26-$28 ( no per diem looking for locals)
Duration: 3 week
Please email me [email protected] And put West Lake in the subject.
NO DMs Please

10/28/2021

We are currently looking for the following crafts for a shop location in Channelview, Tx. Please send resumes to [email protected] No DMs please. Put Electrician Channelview in the subject.
Master Electrician: $38-$40
Journeyman Electrician: $28-$32 (DOE)
Shift: 6am-6pm, 6pm-6am rotating shifts
Temp to Perm, Need immediately start
NO PERDIEM

10/27/2021

We are currently looking to Direct Hire a Field Service Reciprocating Compressor Mechanic. Must have experience troubleshooting, installation/removal, and repair on compressors. Must have worked with Worthington, Demag, Sulzer, Cooper Turbo compressors. Must have a valid Driver
License, current TWIC card, and low DISA background score. Please send resumes to [email protected] with Mechanic in the subject.
Pay: $40-$45 an hour
Location: South Houston shop (will be required to travel)
Schedule: while at the shop is 7am-3:30pm normally 50 to 55 hours
401k, profit sharing, and yearly Bonus.

10/26/2021

We are currently looking for some shop helpers with some Mechanical experience for a shop in Beaumont, Tx. Must have TWIC, pass a DISA background, pass a DISA UA, and DISA HT. Some travel required. Please send resumes to [email protected]
Pay: $18-$20 (no per diem)
Hours: 7am-4pm
Monday-Friday (except when not on a project)

10/18/2021

We are currently hiring Journey Man Electricians and Electrical Apprentice for a long-term shop position in Thomasville, Georgia. If interested, please send resumes to [email protected].
Pay rate: Journeyman $27.00
Apprentice: $22.00
Per Diem: $120.00 (for those who qualify)
Start Date: ASAP
Schedule: Monday-Saturday 6:00am-5:30pm (will receive per diem Sunday)
Will pay mileage and travel time for one round trip ( to shop for start of job, home when it ends)
Must be able to run conduit, wiring, install panels on Boilers.

10/15/2021

We are currently hiring 4 temps for Panama.
Here is the timeline
· November 12th – Fly to Panama
· November 13th – Arrive in country and quarantine in Cobre Panama Hotel
· November 20th – Travel from quarantine hotel to site
· November 25th – Travel from site to Panama City
· November 25th – Overnight in Panama City
· November 26th – Fly back to Houston

Will be assisting Lead Hydro blasters.
Pay Rate is :$28-$30
Hotel, flight and meals paid for.
Must have a valid Passport
please send email to [email protected]

10/15/2021

I need an experienced torque hand for an immediate job. Lotte in Lake Charles, La
Pay:$28-$30
Per diem:$120
Duration: End of October
email me at [email protected]
or text 281-282-1300

10/14/2021

We are currently hiring for an Entry Level Mechanic some experience working on compressors. Must have a valid Driver license, current TWIC, pass DISA drug screen, hair test and low DISA background score. Please send resumes to [email protected]
Location: South Houston Shop (will have to travel)
Pay Rate: $18-$22
Schedule for Shop: 7am-3:30pm
Temp to perm

10/14/2021

We are currently looking to Direct Hire a Field Service Compressor Mechanic. Must have experience troubleshooting, installation/removal, and repair on compressors. Must have worked with Worthington, Demag, Sulzer, Cooper Turbo compressors. Must have a valid Driver
License, current TWIC card, and low DISA background score. Please send resumes to [email protected] with Mechanic in the subject.
Pay: $40-$45 an hour
Location: South Houston shop (will be required to travel)
Schedule: while at the shop is 7am-3:30pm normally 50 to 55 hours
401k, profit sharing, and yearly Bonus.

10/13/2021

We are currently hiring 3 temps with some experience in wiring control panels. This is a good opportunity for an Apprentice to get their foot in the door.
Location: Houston, Tx 77061
Schedule: 40 hours a week (confirming shift time)
Duration: 3 months (possible temp to hire)
Pay rate: $20.00 an hour
Resumes will be required, needing to fill immediately
Please send resumes to [email protected], If I have your resume please text me at 281-282-1300 with your name and put wiring job

10/12/2021

We are currently looking to hire a few Mechanical Engineers. This would be a remote position, however will be required to attend training at the shop in Silsbee, Tx. Please send resumes to [email protected]
Leak repair experienced preferred not required
Pay rate: $35-$40
Temp to Perm would eventually move to On Call position
Equipment needed to work remote issued
Per Diem $120 while training at the shop
Job Scope:
Engineering Skills needed:
Proficient in SolidWorks (3-D design software)
Proficient in MathCad
Proficient in Microsoft
Problem Solving Skills
Engineering Knowledge Preferred:
ASME
Mechanics of Materials
Mechanical Design
Roarks' Variables for Stress and Strain
ASTM Bolting Standard
Engineering Requirements:
Prepare design packages for leak repair enclosures
Prepare design packages for hot tap fittings
Prepare design packages for line wraps
note: packages include engineered drawings and calculations

10/12/2021

We are currently looking for 2 Field Supervisors for Pasadena, Tx
Pay is $40
Will have to Travel 75% of the time
Must have a valid Driver License
email resumes to [email protected]
Responsible for the supervision, coordination and proper work assignments of Field Mechanics.
Assist in the scheduling of field service appointments according to the work priority and maintains an orderly flow of
work.
Service and provide preventive and corrective field mechanical service on Centrifugal and Reciprocating compressors. Disassembles repairs and reassembles components and equipment to ensure proper alignment, balance and tolerances.
Responsible for identifying and communicating work related deficiencies (to Field/Shop Service Manager) due to additional customer/production specifications or requirements along with changes in equipment/technology.
May be required to conduct on-the-job training for new hires and/or employees who require refresher training. Is responsible for completing training related forms and sending them to the document control manager.
Remove, Rebuild and clean compressor rotors
Demonstrated ability to read and understand mechanical drawings required.
Replace, Rebuild and install gear boxes
Assist in the performance management of staff including; corrective action, discipline, competency assessments and
annual performance reviews.

10/12/2021

We are currently looking for Structural welders for Galveston shop job.
Pay is $20-$25 (depending on experience) Great opportunity for someone looking to get their foot in the door.
Duration: 6 months
Shift: 7:00am-4:00pm with a 30 minute lunch. Overtime on the weekends
Weld Test held at the shop. SMAW-P1, Stick 3g&$g, FCAW
Background Friendly ( no violent felonies)
Please send resumes to [email protected] put Galveston in the subject, please no IMs

Address

950 Gemini
Houston, TX
77058

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

(281) 282-1300

Products

HydraWrap®, HydraTite®

Alerts

Be the first to know and let us send you an email when EnerStaff, LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to EnerStaff, LLC:

Nearby government services


Other Houston government services

Show All

Comments

We are currently looking for a HSE Supervisor (Must Have Supervision Experience) please send resumes to [email protected] Requirements: OSHA 510 and 500 Location: Cameron, La Duration: 2 weeks to 2months Start date: 12/27 Pay: $35 an hour and 100 a day per diem
We are currently looking for a FW/HW to go to Maryland 1/3. Pay: $18.00 Duration: About a Month Per diem: $120.00 Will get travel time, will need to have a TWIC and clear background (DISA Score of 0) Please send email to [email protected] put Maryland in the subject with your number. There is only one spot.
Currently looking for a few Singlehand welders for a shop in Channelview field service work after. Must be able to TIG root fill and cap. STICK 6010. Shop pay: 32.00 Field pay $32.00, $120.00 (for those who qualify) Please send resumes to [email protected] Put single hand in the subject
Currently looking for a Mainteance Tech for San Antonio Shop Pay Rate is $28.00 ( no per diem) Experience with running conduit, pulling wire, terminations, and mechanical equipment. AC/DC conversions, Gearboxes, Terminate 3 phase Mechanical, Instrumentation, Pneumatic and able to trouble shoot equipment. Please send resumes to [email protected]
I need a couple of single-hand welders local to the Deerpark, Tx. Will have to weld test Monday at WTI. Welding on a super heater in a shop then moving to the field after a few weeks. Pay is $32.00, send me an email [email protected] with a resume put singlehand in the subject.
We are currently looking for a few Expeditors Location: Remote Pay:$30-$40 This is a remote opportunity, contractor can be based anywhere Candidates must have strong ERP knowledge—they will be inputting data into ERP system, IFS Working knowledge with IFS is strongly preferred, and would be ideal We’re anticipating that this will be a 6 month project, but the duration may vary Please send emails to [email protected] put Expeditor in the subject
We are currently hiring the following positions for Dallas, Tx Receptionist/Admin payrate $18-$20 must have procurement/ P.O order creation HR Temp $15-$20 must have recruiting experience in Oil and Gas Please send resumes to [email protected] put Dallas in the subject
Currently hiring for the following positions: Horizontal boring mills ($32 and up) Multi-Stage Horizontal centrifugal pump mechanics ($28 and up) Location: Houston, Tx 77075 Shop Job with plenty of overtime. Please send resumes to [email protected] Put Shop Houston in the subject.
Direct Hire Opportunity Dump Truck – CDL Class B Drivers Pay up to $28/hr TWIC card preferred Average 50 hours per week. *Must have a clean MVR record *Minimum 2 years of experience required for insurance *Must be able to pass pre-employment drug and alcohol testing Please send resumes to [email protected]
We are currently hiring for the following crafts at a shop in Houston Pump Mechanics: $30 and up (DOE) Must have experience on horizontal and vertical centrifugal pumps Boring Mill Operator: $35 and up (DOE) Location: Houston, TX 77075 (no per diem shop job) Temp to Perm Shift: 6:30am- 2:00pm; 3:30pm – 12:00am (there is a lot of overtime right now must be able to work weekends and longer shifts as required) Please send resumes to [email protected]
Position HR Coordinator Pay: $45k-$60k Direct Hire Location: Dallas, Tx Send Resumes to [email protected] put HR Coordinator in the subject. The HR Coordinator will directly assist the Talent Acquisition Manager on all recruitment activity such as sourcing, screening, requisition management, etc. This person will also support other Corporate HR team members on a wide range of projects related to HR compliance and audits, employer branding, community outreach, social media efforts, onboarding, and general data entry. Education: High school diploma or equivalent required; pursuing a degree in HR Management or similar field preferred Experience: Recruitment experience or HR administrative experience is strongly preferred Basic office experience including Microsoft Outlook, PowerPoint and Word preferred; strong Excel skills preferred Strong working knowledge with various Social Media vehicles (LinkedIn, Instagram, Twitter, Facebook, Snapchat, etc.) General understanding of full-cycle recruiting is strongly preferred Responsibilities: Work within the HRIS database, Ultimate Kronos Group (UKG) to enter in new data, clean-up current applicant data, and help maintain candidate and employee information. Work closely with hiring managers during the screening and selection process. Collaborates with corporate HR team with creating and launching social media campaigns; design and implement social media strategy. Schedule and confirm phone interviews and/or onsite interviews with applicants; coordinates and requests travel accommodations for candidates when needed. Conducts audits to ensure compliance and recommends corrective action. Assists with completing Affirmative Action process and data collection. Runs reports within the reporting system on an as-needed basis as well as builds and schedules reports for other HR team members. Assists in preparing company announcements or correspondence. Collaborates with other HR team members in preparing and executing projects.
Position: HR Temp/Recruiter Pay Rate: $15-$20 (no per diem) Location: Dallas, Tx Temp Position Send resumes to [email protected] put HR Temp in Subject As the Human Resources Temp, you will support the HR team with a wide range of projects. You will use your organization and communication skills to assist in an array of HR responsibilities such as recruiting, pre-hire processes, onboarding, compliance, wellness initiatives, and event planning. You will also assist the team in an administrative capacity as needed. Your responsibilities will require confidentiality and the ability to multi-task. Essential Functions ... • Ability to handle responsibilities with effective interpersonal skills and to effectively interface with others inside and outside the Company is required. • Processes forms related to additions, changes, or deletions for salary administration and benefit programs. • Accurately maintains computerized and manual records to allow for prompt retrieval. • Maintains logs and prepares reports relating to worker's compensation, Equal Employment Opportunity and Affirmative Action. • Organize I-9 documents • Manage and maintain annual shredding • Uses scanning equipment and data storage procedures to stare and facilitate easy retrieval of documents. • Performs a variety of clerical and administrative duties.