Red Nova Energy

Red Nova Energy Red Nova Energy is an Electrical Contractor and a Communication Consulting business. RED NOVA ENERGY is an electrical contractor and communication consulting business with many years of experience.
(1)

We are able to deliver projects on time and in-budget because of our project management system and processes we have in place including productivity tracking as well as short interval scheduling.

Operating as usual

11/11/2020
07/02/2020
Supporting the PTSD Foundation of America.
10/20/2019

Supporting the PTSD Foundation of America.

07/24/2018
07/21/2018

We want to begin by thanking our clients who have trusted our expertise in allowing us to help in your electrical needs. We are grateful for the pleasure of serving you and meeting your needs. When we think about the things we appreciate in starting this business just little less than 3 year ago, we think of our family, friends and our allies. We thank each of you for your vision and commitment to Red Nova Energy.
It gives us great pleasure to announce that Red Nova Energy has been experiencing generous growth over the last year. We have increased our client base, we have promoted personnel to new positions, and we were able to hired more than 20 employees and purchased new vehicles and equipment.
We are proud to have met the challenges of this milestone in the continuing growth and success for Red Nova Energy. For that Reason we wanted to refresh our image, change our logo and rebrand. We look forward to more exciting things to happen in the future.

Red Nova Energy's cover photo
07/21/2018

Red Nova Energy's cover photo

Red Nova Energy
07/21/2018

Red Nova Energy

07/10/2018
Helping Bring Great Electrical Service to Katy.
05/16/2018

Helping Bring Great Electrical Service to Katy.

New Addition to Our Fleet
04/19/2018

New Addition to Our Fleet

Another Great Opportunity to show Our Services
03/27/2018

Another Great Opportunity to show Our Services

Another Site where we are providing Electrical Services
02/17/2018

Another Site where we are providing Electrical Services

One of Our projects. Medical Center
02/05/2018

One of Our projects. Medical Center

12/07/2017
Breaking ground for the new Medical complex
10/12/2017

Breaking ground for the new Medical complex

09/16/2017

We are proud to be affiliated with the BBB. This accreditation validates that our strategy, practices, and standards continue to meet the needs of our clients.

In Wire and Cable exposed to floodwaters should be replaced to assure a safe and reliable electrical system. When wire a...
09/04/2017

In Wire and Cable exposed to floodwaters should be replaced to assure a safe and reliable electrical system. When wire and cable products are exposed to water or excessive moisture, the components may be damaged due to mildew or corrosion. This damage can result in insulation or termination failures. The problem can be more severe if the components have been subjected to salt water during hurricanes, etc., or inland flooding where there may be high concentrations of chemicals, oils, fertilizers, etc.

Wire and cable that is listed for dry locations only, such as NM-B, should be replaced if it has been exposed to floodwater. NM-B cable contains paper fillers that can pull contaminated water into the cable, which can cause premature cable failure. Flood damaged cable should be replaced to assure a safe and reliable installation.

Products listed for wet locations, such as THWN and XHHW, may be suitable for continued use if no contaminates are present in the cable. There may be problems that show up later because of corrosion of the conductor. This could result in overheating of the conductor. If the ends of a conductor have been exposed to water, the cable may be purged to remove the water. An insulation resistance test should be conducted before the cable is energized.

All wire or cable products that have been exposed to contaminated floodwater need to be examined by a qualified person, such as an electrical contractor, to determine if the cable can be re-energized. Flood damaged cable may not fail immediately when energized. It may take months for the cable to fail due to damage caused by floodwaters.

Southwire Company, LLC

In Wire and Cable exposed to floodwaters should be replaced to assure a safe and reliable electrical system. When wire and cable products are exposed to water or excessive moisture, the components may be damaged due to mildew or corrosion. This damage can result in insulation or termination failures. The problem can be more severe if the components have been subjected to salt water during hurricanes, etc., or inland flooding where there may be high concentrations of chemicals, oils, fertilizers, etc.

Wire and cable that is listed for dry locations only, such as NM-B, should be replaced if it has been exposed to floodwater. NM-B cable contains paper fillers that can pull contaminated water into the cable, which can cause premature cable failure. Flood damaged cable should be replaced to assure a safe and reliable installation.

Products listed for wet locations, such as THWN and XHHW, may be suitable for continued use if no contaminates are present in the cable. There may be problems that show up later because of corrosion of the conductor. This could result in overheating of the conductor. If the ends of a conductor have been exposed to water, the cable may be purged to remove the water. An insulation resistance test should be conducted before the cable is energized.

All wire or cable products that have been exposed to contaminated floodwater need to be examined by a qualified person, such as an electrical contractor, to determine if the cable can be re-energized. Flood damaged cable may not fail immediately when energized. It may take months for the cable to fail due to damage caused by floodwaters.

Southwire Company, LLC

09/04/2017

Recommendations for
Re-Energizing Flood-Damaged
Electrical Equipment

1. Make sure the power is actually off.
2. Inspect the surrounding area for standing
water.
3. Identify electrical equipment that was or
may have been submerged.
4. Inspect electrical equipment that was not
submerged.
5. Replace or refurbish large electrical
equipment.
6. Replace small components of wiring
infrastructure.
7. Replace circuit protection devices and
power distribution devices.
8. Examine busways and replace or
recondition them.
9. Inspect motor control equipment and
replace or refurbish.
10. Replace dry-type transformers, and
analyze liquid-filled transformers.
11. Replace wire, cable or flexible cord
12. Replace or refurbish other devices.

07/17/2017

We are pleased to announce that we signed a new lease agreement. We will be moving next month to a more spacious office with a much bigger warehouse.
Soon we will provide more details.

The fleet
06/21/2017

The fleet

Timeline Photos
06/03/2017

Timeline Photos

Something to light up your day!!
05/31/2017

Something to light up your day!!

Red Nova Energy is honoring our fallen heroes
05/29/2017

Red Nova Energy is honoring our fallen heroes

HAPPY EASTER!!!!!! Hope you have a blessed day!!!!
04/16/2017

HAPPY EASTER!!!!!! Hope you have a blessed day!!!!

One more Acquisition to our fleet!
03/24/2017

One more Acquisition to our fleet!

Build a Bear Workshop - Woodland's MallGetting close to the completion of this project.
03/16/2017

Build a Bear Workshop - Woodland's Mall
Getting close to the completion of this project.

Christmas party time! We are thankful for our loyal and hard working employees for making our first year in business a s...
12/18/2016

Christmas party time! We are thankful for our loyal and hard working employees for making our first year in business a success!

We hope you have a wonderful Thanksgiving with your family and friends!
11/24/2016

We hope you have a wonderful Thanksgiving with your family and friends!

10/26/2016

A year after we founded Red Nova Energy, Our President Mariano Santiago is back where everything started. He said -"I feel so blessed for the opportunities ahead and for the awesome people I meet on a daily basis".

Our trained professionals working at different job sites. Happy Monday!
10/03/2016

Our trained professionals working at different job sites. Happy Monday!

RNE now offers Electrical Design Services by using the latest design software! We will develop recommendations and solut...
09/28/2016

RNE now offers Electrical Design Services by using the latest design software! We will develop recommendations and solutions based on your objectives, current facilities and ensure your project is implemented in the most timely and cost-efficient manner. Our trained professionals will use their in-depth knowledge of codes, specifications, and best practices to ensure that reliability and safety are at the core of every project. Contact us today for help with your Electrical Design projects!

Red Nova Energy's cover photo
08/23/2016

Red Nova Energy's cover photo

Red Nova Energy
08/23/2016

Red Nova Energy

Office
08/23/2016

Office

Red Nova Energy
05/12/2016

Red Nova Energy

Address

2121 Brittmoore Dr. Ste 5000 Houston, TX 77043
Houston, TX
77043

Opening Hours

Monday 08:00 - 17:00
Tuesday 08:00 - 17:00
Wednesday 08:00 - 17:00
Thursday 08:00 - 17:00
Friday 08:00 - 17:00

Telephone

(281) 973-6200

Alerts

Be the first to know and let us send you an email when Red Nova Energy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Red Nova Energy:

Nearby government services


Other Public Utilities in Houston

Show All

Comments

Thanks to our clients for trusting Red Nova Energy with your Residential and Commercial needs. Loyalty from customers like you has fueled continued growth, making a move to a new facility necessary.