MONTI - Werkzeuge GmbH

MONTI - Werkzeuge GmbH The complete surface-preparation system: remove, profile, verify, maintain. Engineered in Germany, trusted in the world's most demanding environments.

Information provided in accordance with applicable statutory requirements. Provider
MONTI Surface Tech Group B.V. Strawinskylaan 1577
1077 XX Amsterdam
The Netherlands

Part of the MontiPower® group, owned by MontiPower Industries B.V. Contact
E-mail: [email protected]
Contact form: montipower.com/de/service-support/kontakt

Represented by (statutory director): Frits Doddema

Country of domicile

: The Netherlands

Chamber of Commerce (KVK) number: 95233504

VAT identification number: [Dutch BTW / VAT number to be inserted]

Terms: General Terms and Conditions

Register and registration number
Registered with the Netherlands Chamber of Commerce (Kamer van Koophandel). KVK number: 95233504. Consumer dispute resolution
We are not willing and not obliged to participate in any dispute resolution proceedings before a consumer arbitration board. Social media accounts and other online profiles
This legal notice also applies to MontiPower's official social media accounts and online profiles. Liability disclaimer
While the content of this website has been put together with great care and reflects our current knowledge, it is provided for information purposes without being legally binding, unless the disclosure of this information is required by law (e.g. the legal notice, the privacy policy, terms and conditions, or mandatory instructions for consumers). We reserve the right to modify or delete the content, whether in full or in part, provided this does not affect our existing contractual obligations. All website content is subject to change and non-binding. Link disclaimer
We do not accept any responsibility for, or endorse, the content of external websites we link to, whether directly or indirectly. The providers of the linked websites are solely responsible for all content presented on their websites and, in particular, for any damage resulting from the use of the information offered on their websites. Copyrights and trademarks
All contents presented on this website, such as texts, photographs, graphics, brands and trademarks, are protected by the respective intellectual property rights (copyrights, trademark rights). The use, reproduction, etc. are subject to our rights or the rights of the respective authors or rights owners. Information on legal infringements
Please notify us if you notice any rights violations on our website. Once notified, we will promptly remove any illegal content or links.

27/08/2026

Our partner MontiPower Brasil is exhibiting at Expominas in Belo Horizonte, showcasing our innovative Bristle Blaster technology for surface preparation.

Bristle Blaster combines high-performance surface preparation with a unique Rotary Impact Surface Preparation technology. It removes corrosion, coatings and mill scale while creating a surface profile comparable to abrasive blasting, all with a compact, easy-to-use hand tool.

- Fast and efficient surface preparation
- Removes corrosion and coatings
- Creates a blast-like surface profile
- Ideal for maintenance and repair applications
- Available for a wide range of industrial environments

Visit Monti Brasil at Expominas and discover the technology for yourself!

Bristle Blaster. Blasting performance, without the blast.

20/07/2026

A great video from our valued distributor in the Philippines, showcasing the advantages of Bristle Blasting technology and our handheld tools compared to conventional blasting methods.
From higher productivity and consistent surface preparation to improved safety and mobility, this is a great example of how innovation is transforming the way surface preparation is done.
A big thank you to Francis Edward Endaya and the entire SEPCO INDUSTRIAL SUPPLY team for putting this excellent demonstration together and for your continued partnership!

08/07/2026

Watch the Vinyl Zapper® in action as it removes decals, graphics, and adhesive residues from a train wagon surface, without damaging the underlying substrate.
Unlike traditional removal methods that rely on heat guns, chemicals, or time-consuming manual scraping, the Vinyl Zapper quickly and effectively eliminates vinyl wraps, stickers, and adhesive build-up while preserving the integrity of the surface.
The result? Reduced maintenance time, lower labor costs, and a clean surface ready for inspection, repainting, or the application of new graphics.
Whether in rail, automotive, fleet, or industrial maintenance, the Vinyl Zapper helps operators minimize downtime and maximize productivity.

16/06/2026

Preparation starts before blasting quality.
This jetty pile structure is being treated with the Bristle Blaster® as a critical pre-step in the surface preparation process. The system removes thick and heavy coatings, corrosion, and contaminants while creating a uniform anchor profile that prepares the surface for the next stage of treatment.
The result? Improved blasting efficiency, reduced abrasive consumption, and optimal conditions for long-term coating performance.
As part of the Strip & Prep Concept, Bristle Blaster delivers a cleaner, more consistent surface before blasting begins, helping contractors achieve higher productivity and superior coating adhesion.

Today, we are very pleased to welcome Zoran Kovarcek back to the MontiPower family.His return marks an exciting moment f...
28/05/2026

Today, we are very pleased to welcome Zoran Kovarcek back to the MontiPower family.
His return marks an exciting moment for all of us, and we are proud to have him rejoin our international team. Zoran’s passion, experience, and strong belief in Bristle Blasting technology have always made a significant impact.
At MontiPower, we believe our success is driven by people — through focus, teamwork, innovation, dedication, and long-term relationships with customers and partners. Zoran embodies these values, and we are excited to continue shaping the future together.
In the coming months, one of our key priorities will be further strengthening the German market together with our Hennef team by reconnecting with customers and continuing to provide the highest level of support and service.
Zoran will work closely with Stefan Floegel and our teams across Europe, including Ratingen, Bratislava, Hungary, Poznan, Antwerp, and the Netherlands, supporting continued business development and growth across the entire MontiPower group.
We are also looking forward to many new moments together, continuing the spirit of collaboration, innovation, and unforgettable team experiences that define MontiPower.
Welcome back, Zoran! We are very happy to have you with us again.

In the photo: Sander Hofstee, Frits Doddema, Zoran Kovarcek, Antonin Blecha (Monti PWA)

19/05/2026

Advanced 3Layer PE or PP removal for cathodic protection (CP) pin brazing.
High-performance surface preparation in action on a 3-layer FBE/Glue/PE pipeline ahead of CP pin brazing.
The PE coating was efficiently removed using the Blasting Disc as a powerful pre-treatment step, breaking down the yellow PE-coating and preparing the surface for precision finishing. This was followed by Bristle Blasting, delivering a cleaner uniform surface profile in line with ISO 8501-1 (comparable to Sa 2 ½). The process also enabled smooth feathered edges, ensuring optimal transition zones for reliable electrical insulation. A proven combined method for controlled coating removal, superior surface profiling, and reliable, field-ready results.

12/05/2026

The first week of May was an active and exciting one for MONTIPOWER and our partners across multiple regions and industry events.
MontiPower Central Europe, represented by Martin Durčík, showcased our expertise in surface preparation, Bristle Blasting technology, and coating performance during the Opatija Gas & Oil event in Croatia. In Latin America, the MontiPower LATAM team — Andres Navarette, Sjoerd van Dooren, and Izaak van Drongelen — together with our local distributor , presented Bristle Blasting technology at the Summit in Costa Rica, engaging with industry professionals and sharing insights into advanced surface treatment solutions. Meanwhile, , in collaboration with and supported by Frank Valls, Haritz Elexpuru, Andrew Swan, Joel Bialek, and Nathan Knight, had a fantastic presence at the Show in Indianapolis, introducing our latest laboratory equipment and innovations to the paint industry.
A big thank you to all our partners for their outstanding work, commitment, and strong representation of our technologies across these important international events.

07/05/2026

Coating removal with the Bristle Blaster delivering excellent surface preparation results. In this application, the Bristle Blaster effectively removes FBE pipeline coating while achieving surface cleanliness in line with ISO 8501-1, comparable to Sa 2 ½.
At the same time, it creates a uniform and consistent anchor profile, ensuring optimal coating adhesion and long-term performance.
This process combines efficiency with precision, making it a strong alternative to traditional abrasive blasting—especially in field applications where mobility, control, and reduced setup are critical.
Key advantages observed:
✔ Consistent, reproducible surface profile
✔ Effective removal of FBE coatings and corrosion layers
✔ Surface cleanliness comparable to Sa 2 ½ (ISO 8501-1)
✔ Reduced setup time compared to conventional blasting
✔ Optimal anchor profile for coating adhesion and durability
✔ Ideal for on-site and maintenance work

05/05/2026

In field joint preparation on 3LPE / 3LPP pipelines, one challenge keeps coming back. How do you remove PP or PE pipeline coating without damaging the FBE primer?
This is exactly where the MONTI Vinyl Zapper stands out. It’s not just a removal tool. It’s a controlled coating preparation solution.
• Perfect for feathering edges
It naturally creates a smooth transition zone, which is critical for proper tape or shrink sleeve adhesion and long-term sealing performance.
• Consistent and repeatable
Operator-independent results reduce variability on site.
• Preserves corrosion protection integrity
By maintaining the FBE layer, you avoid exposing bare steel unnecessarily, reducing the risk of corrosion initiation during application.
The result?
✔ Cleaner surface prep
✔ Better adhesion of field joint coating systems
✔ Lower failure risk over time
You’re not just removing coating. You’re protecting the system beneath it.

Preparing the Surface for the Future. One machine. Two essential steps: coating removal and surface preparation. It take...
16/04/2026

Preparing the Surface for the Future. One machine. Two essential steps: coating removal and surface preparation. It takes two to tango.
This is the power of our Strip & Prep Concept by BristleBlaster, delivering the highest level of cleanliness and a perfectly homogeneous surface profile.
Here you see Camila Montino Mena from TRAMETAL LTDA (Chile) during her training at MontiPower in Macaé, Brazil with Dirk Pohlmann.
The combination works seamlessly: The combi efficiently removes thick coatings and corrosion on flat surfaces BristleBlaster belts gently treat welds, corners, and complex geometries Together, they form a powerful solution to increase speed while achieving top-tier surface preparation quality.

Interested in learning more or getting trained? We offer hands-on training in over 20 locations worldwide, including the Netherlands, Germany, Poland, Slovakia, UAE, USA, Brazil, Japan, Australia, Malaysia, Singapore, Panama, and Belgium. Let’s raise the standard in surface preparation — together.
https://eu1.hubs.ly/H0tysFJ0

Adresse

Strawinskylaan 1577
Hennef
1077XX

Öffnungszeiten

Montag 08:00 - 17:00
Dienstag 08:00 - 17:00
Mittwoch 08:00 - 17:00
Donnerstag 08:00 - 17:00
Freitag 08:00 - 17:00

Telefon

+49 2242 9090630

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von MONTI - Werkzeuge GmbH erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Verknüpfungen

Teilen