26/10/2026
In online discussions, or even during chats in the workshop or at the wholesaler’s counter, there’s often a view that the most important parameter determining whether an air filter is good is the amount of air - yes, air - passing through that filter. 💨
Supporters of this theory are usually split into two camps: some believe that the more air passes through the filter, the better, because then the engine gets the right kind of “kick”. Others, on the contrary, argue that a good filter is one with lower flow, because it then retains more contaminants. 🛡️
Which side is right here? Well, actually both. But only with the right balance. 😉
The key to achieving the proper parameters in an air filter is balance. A well-designed filter must provide the engine with the correct airflow, while at the same time trapping particles that can damage pistons, cylinders, or the turbocharger. In other words, the permeability of the filter has to be there, but it cannot be too high, so as not to expose the engine to damage.
Easy to say, harder to do. Achieving such a balance in filter production is no easy task. But at FILTRON, we’ve managed to do it. And to back that up, we have concrete test results. 🔬 In laboratory tests, our AP 151/5 filter, installed among others in the Ford Fiesta Mk VI and VII, as well as the Mazda 2, managed to capture more than twice as many harmful particles as the competitor’s equivalent, while maintaining lower air flow resistance*. This is not a matter of chance, or a single successful sample. Achieving results like these requires the right know-how, experience, meticulous testing, and engineering capabilities. At FILTRON, we have all of that.
Have you ever come across opinions that a good air filter is one that lets more or less air through? Or perhaps, at some point, were you yourself part of one of these “schools”? 🙂
________________________________________________________
*Controlled M+H laboratory test comparing the FILTRON AP 151/5 filter with a competitor’s equivalent. The FILTRON AP 151/5 showed 128% higher efficiency in the dust capacity test. A controlled M+H laboratory test comparing the FILTRON AP 151/5 filter with a competitor brand equivalent. The initial pressure drop test (delta P) showed 14% lower flow resistance for the FILTRON AP 151/5 filter without any loss of efficiency.