Make Up Challenge

Make Up Challenge Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Make Up Challenge, Government Official, 1395 Angie Drive, Los Angeles, CA.

Based on the image, the red device is likely a custom-built, homemade, or modified hydraulic car lift jack.The device ap...
05/15/2026

Based on the image, the red device is likely a custom-built, homemade, or modified hydraulic car lift jack.
The device appears to be fabricated from scrap metal and hydraulic components rather than a standard retail product.
It is designed to lift a vehicle from the side, allowing for quick access to the undercarriage or for tire changes.
There are concerns regarding the stability of this specific placement, as placing jacks on body seams rather than reinforced jacking points can cause structural damage.

This appears to be a heavy-duty striking anvil mounted on a custom-fabricated stand.The top portion is a solid block of ...
05/15/2026

This appears to be a heavy-duty striking anvil mounted on a custom-fabricated stand.
The top portion is a solid block of steel designed for heavy striking work, featuring a hardy hole for tools and a pritchel hole for punching.
The base is constructed from welded steel pipes and tubes for stability
It is intended to sit lower than a standard anvil to allow for full-force swings with a sledgehammer.

This appears to be a 1946 Pond Lever Steer tractor, which is recognized as the first model produced by Wheel Horse.These...
05/15/2026

This appears to be a 1946 Pond Lever Steer tractor, which is recognized as the first model produced by Wheel Horse.
These tractors were hand-built by Elmer and Cecil Pond in 1946, with only approximately 50 units manufactured.
Instead of a traditional steering wheel, this model uses a vertical lever to actuate steering.
The tractor was constructed using recycled automotive parts and typically utilized small engines, such as a Wisconsin engine.

The selected region shows a galvanized motorcycle trailer designed for transporting bikes.This trailer appears to be a f...
05/15/2026

The selected region shows a galvanized motorcycle trailer designed for transporting bikes.
This trailer appears to be a folding or collapsible model, similar to the "Bikelug" style, designed for easy storage when not in use.
The frame is constructed from hot-dipped galvanized steel to prevent rust and ensure durability.
It features a low-profile design that allows the trailer to tilt for easy loading and unloading of a single motorcycle.
The unit includes standard wheels, a tongue for hitching to a vehicle, and a support structure for securing the front wheel of the bike.

The selected region shows a hydraulic hoist kit used to lift a dump truck bed.This specific assembly resembles a scissor...
05/15/2026

The selected region shows a hydraulic hoist kit used to lift a dump truck bed.
This specific assembly resembles a scissor lift or flatbed dump hoist mechanism, designed to tilt truck beds for unloading materials.
It operates using a hydraulic cylinder powered by a pump, capable of lifting significant loads depending on the model capacity.
Such kits are often used to convert standard trucks or trailers into functional dump vehicles.

This is a homemade abrasive metal cutting saw, constructed from a salvaged electric motor and repurposed steel component...
05/15/2026

This is a homemade abrasive metal cutting saw, constructed from a salvaged electric motor and repurposed steel components.
The saw utilizes an abrasive cutoff disk to slice through metal.
A V-belt connects the electric motor to the cutting wheel, often featuring different-sized pulleys to adjust rotational speed.
The frame is typically welded or bolted together using angle iron and square tubing for structural stability.

Based on the images provided, here are some details regarding this equipment:This appears to be a homemade or specialize...
05/15/2026

Based on the images provided, here are some details regarding this equipment:
This appears to be a homemade or specialized agricultural mini-tractor, similar to a "dumper" or utility vehicle used for small-scale farming and transportation.
It features a functional dump bed for transporting materials and a tractor-style seat for the operator.
Vehicles of this type often utilize components from other machinery, such as gearboxes from older car models like the ZAZ-968, to create a functional 4x4 or powered transporter.
The branding "ШЕРШЕНЬ" (translated as Hornet) suggests it may be a custom-built unit, commonly found in regions like Ukraine where such specialized DIY equipment is popular.

This is a vintage Power King tiller steer tractor, likely from the 1950s, featuring a bright red paint job and heavy-dut...
05/15/2026

This is a vintage Power King tiller steer tractor, likely from the 1950s, featuring a bright red paint job and heavy-duty agricultural tires.
These small tractors, often called "garden tractors," were designed for versatile agricultural use.
They were manufactured by Engineering Products Company in Waukesha, Wisconsin, and sold under names like Economy, Power King, and sometimes Country Squire.
This model uses a tiller steering mechanism rather than a traditional steering wheel, a common feature on early versions.

This is a custom rear air suspension setup featuring a four-link system and airbag components.The structure shown is a f...
05/15/2026

This is a custom rear air suspension setup featuring a four-link system and airbag components.
The structure shown is a fabricated chassis designed for custom vehicle builds, commonly used in classic truck restorations.
The system uses air bags (convoluted airbags) instead of traditional springs to adjust ride height.
It utilizes a four-link suspension setup, which includes upper and lower control arms to locate the rear axle housing securely.
Also visible are rear shock absorbers, brake calipers, and potential components for air management like sensors or mounting brackets.

The selected region features the suspension system of a custom-built car hauler trailer.The system utilizes air bags (or...
05/15/2026

The selected region features the suspension system of a custom-built car hauler trailer.
The system utilizes air bags (or air springs) in place of traditional metal springs to support the load.
These airbags can be inflated or deflated to adjust the trailer's ride height, allowing it to lower for easier loading of low-profile vehicles.
A shock absorber is mounted vertically alongside the air bag to dampen suspension movement and improve stability.
The structure involves welded metal components, indicative of a custom fabrication project designed for specific hauling needs.

Address

1395 Angie Drive
Los Angeles, CA
90017

Telephone

+16265296472

Website

Alerts

Be the first to know and let us send you an email when Make Up Challenge posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category